Enter/exit silent mode, Vibrate mode, Adjust the ringer – Samsung SECR450ZRAMTR User Manual
Page 21
Understanding Your Phone 18
•
To disable Speakerphone Mode:
ᮣ
Press and hold
until “Speakerphone Off” appears in
the display.
Note: Your phone automatically enters Speakerphone Mode when you dial a
call using the QWERTY keypad and the called phone begins ringing.
Enter/Exit Silent Mode
Silence the tones your keypad makes when you press a key.
•
To enter Silent Mode:
ᮣ
In standby mode, press and hold
. “Entering Silent
Mode” briefly appears in the display and your phone
returns to standby mode.
•
To exit Silent Mode:
ᮣ
While in Silent mode and standby mode, press and hold
. “Exit Silent Mode” briefly appears in the display
and your phone returns to standby mode.
Vibrate Mode
ᮣ
In standby mode, repeatedly press the volume key
(
) down until Vibrate appears in the display.
The volume key is on the upper right side of phone.
Adjust the Ringer
1.
In standby mode, press the volume key (
) on the
right side of the phone up or down. Options are:
2.
When you are satisfied with the setting, press
or
.
Your phone returns to standby mode.
Tip: You can also enter the Volume > Voice Calls sub-menu by pressing the
Menu key (
), then pressing the
,
,
, and
keys. Use the Volume key on the right side of your phone to adjust the
ringer volume setting.
Note: The Vibrate icon (
) appears in the display when the phone is in
Vibrate mode. The Vibrate/Ring icon (
) appears in the display
when the phone is in Vibrate/High mode.
• Ringer Off
• Medium
• Vibrate
• Medium/High
• Low
• High
• Low/Medium
• Vibrate/High
OK
OK