Samsung SECR450ZRAMTR - Manual (Page 74)

71
• Go to — Lets you access the following list of your phone’s features
and functions:
– Contacts
– Calls
– Messages
– MetroWEB
– @metro
– VoiceSVC
– Multimedia
– Tools
– Settings
• Check — Lets you say a single command (such as “Status”) to verify
your phone's: Status, Signal, Network, Battery, or My phone #.
Note: Speaking clearly, say the command that you want to use. If VoiceSignal
does not recognize a command, it prompts you to repeat the
command. If VoiceSignal still does not recognized the command, it
tells you “Sorry, no match found” and cancels voice recognition.
Voice Command Tips:
• Make sure you wait for the beep before speaking.
• Speak clearly at a normal volume, as if you were talking on the phone.
Voice Settings
To access the Voice Settings menu:
ᮣ In standby mode, press or , then select Voice SVC
➔ Voice Settings.
Choice Lists
When VoiceSignal cannot recognize a name or number, it
displays a choice list of up to three possible choices, and
prompts you to confirm the correct one.
You can select how VoiceSignal will use choice lists with name
dialing, digit dialing, and Contacts.
To change the way VoiceSignal uses choice lists:
1. From the Voice Settings menu, select Choice Lists. The
following options appear in the display:
• Automatic — VoiceSignal displays a choice list only when it is not
sure if it has correctly recognized the name or number.
• Always On — VoiceSignal always displays a choice list, even
when there is only one choice.
• Always Off — VoiceSignal never displays a choice list.
2. Select a new setting or press or to return to the
Voice Settings menu.
OK