Samsung SPH-L710MBASPR - Manual (Page 74)

Settings 61
2. Tap the ON/OFF slider to turn S Beam on .
3. Touch the back of your phone with another NFC-capable device to transfer content.
Wi-Fi Direct
Wi-Fi Direct allows phone-to-device connections so you can transfer large amounts of data over
a Wi-Fi connection.
Activate a Connection
1. Press > and tap Settings > More settings.
2. Tap the ON/OFF slider to turn Wi-Fi direct on .
3. Tap Wi-Fi Direct to set up a peer-to-peer connection over Wi-Fi. While in Wi-Fi Direct
mode, the status bar will display .
Note: The target device must also have Wi-Fi Direct service active and running before it can
be detected by your device.
Assign a Unique Name
1. Press > and tap Settings > More settings > Wi-Fi Direct.
2. Tap > Device name.
3. Modify the current name and then tap OK.
Nearby Devices
This option allows you to share your media files with nearby devices using DLNA.
1. Press > and tap Settings > More settings > Nearby devices.
2. Verify Wi-Fi Direct is enabled and you are paired with the device you wish to detect and
share content with.
3. Tap the ON/OFF slider to turn File sharing on .
4. At the Nearby devices prompt, tap OK.
5. Tap Shared contents and then check the media you would like to share. Tap OK.
6. Tap Device name and then use the onscreen keyboard to change the name shown to
others. Tap Save.