Samsung SPH-M800ZKASPR - Manual (Page 107)

Speech t
o
Action
Section 2H. Speech to Action 95
Using Choice Lists
If your device is not confident it has recognized a name
or number correctly, it might display a choice list and
prompt you with “
Call? ” followed by the first choice on
the list. To confirm the choice, say “ Yes ,” or to hear the
next choice, say “ No .” You can also select the correct
choice by touching the associated onscreen option. To
cancel the command, say “
Cancel ,” or to say the name
or number again, say “ Repeat .”
Enabling and Disabling Choice Lists
You can customize whether the Voice Recognition
feature displays either a list of top Voice Recognition
choices or automatically dials the first number without
displaying a choice list.
To enable or disable choice lists for Digit Dial:
1. Press .
2. From the “Say a Command” page, touch Settings >
Mode . (The device displays a reset voice dialog.)
3. Touch one of the following onscreen options:
Ⅲ Expert Mode displays both a selectable list of
matching entries and if the first entry is not
correct, the device will continue to read out each
available option until it detects either a
confirmation (Yes) or rejection (No).
Ⅲ Prompt Mode displays a selectable list of available
dialing options and only reads out the entry
name. You are required to touch an onscreen
option to activate a command.
Readout Mode announces only the Speech to Action
menu options that are currently displayed onscreen.
Nerva.book Page 95 Tuesday, June 24, 2008 3:59 PM