Recording voice, Mp3 encoding, Mp3 encoding recording voice – Samsung YP-ST5Z-XAA User Manual
Page 14
27
MP3 Encoding
Recording Voice
26
1
Press and hold the REC button to start voice recording.
2
Press the REC button again to stop the recording and save the
voice file.
✽
To move to other modes from the Voice mode, refer
to page 33 "Changing Mode"
✽
To move to other modes from the LINE_ENC
mode,refer to page 33 "Changing Mode"
1
Connect the Audio Output port on the external audio source
(or the Line Out port) to the ENC port on the device with the Line cable.
2
Press and hold the REC button to start MP3 encoding.
3
If the REC button is pressed during encoding, the encoding stops and an
encoding file is created.
● The files are encoded in the order of L001, L002....
and saved as MP3 file in LINE_ENC folder after encoding.
N
N
N
N
o
o
o
o
tt
tt
e
e
e
e
- The files are recorded in the order of V001,V002......,
and saved as WAV file in the VOICE folder after recording.
- If the Memory is full, Voice Recording will be disabled automatically.
- Voice Recording does not work in FM Mode or when the Line In cable is connected.
✍
N
N
N
N
o
o
o
o
tt
tt
e
e
e
e
- Bit Rates can be set within the range of 32Kbps~128Kbps.
- Volume can be adjusted while monitoring the Encoding.
✍
N
N
N
N
o
o
o
o
tt
tt
e
e
e
e
- Do not disconnect the Line cable during Encoding.
- If the battery is not sufficiently charged, the player will not completely encode the file.
- Adjust the volume of the external audio source to a suitable level and encode it.
If the volume level is too high, the sound quality may be poor.
✍
ST5 AME ENG0.0 9/30/04 10:0912:0 Page 26