Samsung PN50B400P3DXZA - Manual (Page 8)

English - 8
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV.
The product color and shape may vary depending on the model. N
The performance of the remote control may be affected by bright light.
N
1 POWER
Turns the TV on and off.
2 NUMERIC BUTTONS
Press to change the channel.
3
Press to select additional channels (digital
and analog) being broadcast by the same
station. For example, to select channel
“54-3”, press “54”, then press “ ” and “3”.
4 MUTE
Press to temporarily cut off the sound.
5 VOL
Press to increase or decrease the volume.
6 SOURCE
Press to display and select the available
video sources.
7 CH LIST
Used to display Channel Lists on the screen.
8 TOOLS
Use to quickly select frequently used
functions.
9 UP▲/DOWN▼/LEFT◄/
RIGHT►/ENTER
Use to select on-screen menu items and
change menu values.
0 INFO
Press to display information on the TV
screen.
! COLOR BUTTONS
Use these buttons in the Channel list.
@ P.SIZE
Picture size selection.
# TV
Selects the TV mode directly.
$ PRE-CH
Tunes to the previous channel.
% CH
Press to change channels.
^ MENU
Displays the on-screen menu.
& FAV.CH
Press to switch to your favorite channels.
* RETURN
Returns to the previous menu.
( EXIT
Press to exit the menu.
) CC
Controls the caption decoder.
a MTS
Press to choose stereo, mono or Separate
Audio Program (SAP broadcast).
Installing Batteries in the Remote Control
❑
1. Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batteries.
Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. N
3. Close the cover as shown in the figure.
Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a
N
long time. (Assuming typical TV usage, the batteries should last for about one year.)
If the remote control doesn’t work, check the following
N
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
BN68-02426A_Eng.indb 8 2009-09-10 �� 2:58:11