Samsung SCH-R450ZKACRI - Manual (Page 101)

Voice SVC 98
3. Wait for the beep and say the digits using your normal tone
of voice. After a moment, the phone plays back the
recording and prompts “Did the recording sound ok?”
• If the recording was good, say “Yes.”
• If you need to re-record, say “No.”
If you say “No,” the phone prompts you to pronounce the
digits again. Wait for the beep and then say the digits.
Repeat this step until you’re satisfied with the recording.
4. After confirming that the recording sounds “ok”, continue
the recording process with the next set of digits.
5. After 10 sets of digits, “Adaptation complete” plays
through the speaker and you are returned to the Digit
Dialing menu.
Reset Digits
To reset digit dialing to factory default settings, do the following:
1. From the Voice SVC menu, select Voice Settings ➔ Digit
Dialing.
The following options appear in the display:
• Adapt Digits
• Reset Digits
2. Select Reset Digits. The phone prompts you to confirm
digit adaptation rest.
To reset your digit adaptation, press the OK soft key. To
cancel and retain your digit adaptation, press the Back
soft key.
Sound
Sound lets you specify what (if any) text prompts you want your
phone to read to you through the earpiece.
1. From the Voice SVC menu, select Voice Settings ➔
Sound. The following options appear in the display:
• Prompts — Enables or disables audio prompts.
• Digits — Enables or disables audio digit playback.
• Names — Enables or disables audio name playback.
• Name Settings — Lets you adjust the speed and volume of your
phone’s audio name playback.
2. Highlight the desired setting.
3. Press to accept the new setting. OK