Data counter, Store numbers from call logs – Samsung SCH-R450ZKACRI User Manual
Page 32
29
Note: Although Total call timers can be erased, LifeTime call timers can
never be erased.
Data Counter
Use Data Counter to view the amount of data that has been sent
or received (or a total of both) using the data services that your
phone supports. The Data Counter can be a helpful tool for
monitoring data usage, especially if your service agreement has
specified limits.
1.
In standby mode, press Menu, then select Calls
➔
Data
Counter.
The following options appear in the display:
• Transmit — Shows the amount of data (in kilobytes) that your
phone has transmitted since last being reset.
• Received — Shows the amount of data (in kilobytes) that your
phone has received since last being reset.
• Total — Shows the amount of data (in kilobytes) that your phone
has transmitted and received since last being reset.
• Last Reset — Shows the date and time you last reset all counters
(except Lifetime Data Counter).
• Lifetime Data Counter — Shows the amount of data (in
kilobytes) that your phone has transmitted and received since being
activated.
2.
To reset a timer other than Lifetime Data Counter, use the
Up/Down navigation keys to highlight the timer you want to
reset and press the Reset soft key.
3.
To reset all timers except Lifetime Data Counter, press the
Reset All soft key.
4.
Press
to exit the Data Counter screen.
Note: Although other data counters can be reset, only the Lifetime Data
Counter can never be reset.
Store Numbers from Call Logs
Store numbers from your Outgoing, Incoming, Missed, and All
calls logs to Contacts.
Tip: In standby mode, briefly press
to display the Recent Calls list.
You can then select any call in the list to save to Contacts.
1.
In standby mode, press Menu, then select Calls.
2.
Press the corresponding number on the keypad to view
call logs for the following call types.
•
for Outgoing Calls
•
for Incoming Calls
•
for Missed Calls
•
for All Calls
3.
Select the number you wish to store in Contacts.
4.
Press the Options soft key, then select Save.
OK