Recording voice, Mp3 encoding – Samsung YPT5V-XAC User Manual
Page 15
MP3 Encoding
29
Recording Voice
28
1
Press the REC button to start voice recording.
Press the REC button again to stop the recording and a
voice file is saved.
2
N
N
N
N
o
o
o
o
tt
tt
e
e
e
e
●
Recording is performed in order (V001, V002, etc.)
and files are saved in the WAV format after recording.
●
If the Memory is full, the Voice Recording is stopped automatically.
●
Voice Recording does not work in FM Mode or when the Line In cable is connected.
To Record Voice
1
Connect the Audio Output port on the external audio source
(or the Line Out port) to the ENC port on the device with the Line cable.
2
Press the REC button to start MP3 encoding.
●
If the button is pressed, encoding is paused and if the button is pressed again,
the encoding resumes.
3
If the ENC button is pressed during encoding, the encoding stops and an
encoding file is created.
●
Encoding is performed in order (L001, L002, etc.)
and files are saved in the MP3 format after encoding.
N
N
N
N
o
o
o
o
tt
tt
e
e
e
e
●
Bit Rates can be set within the range of 32Kbps~128Kbps.
●
Volume can be adjusted from level 0 to 10 while monitoring the Encoding.
N
N
N
N
o
o
o
o
tt
tt
ii
ii
cc
cc
e
e
e
e
●
Do not disconnect the Line cable during Encoding.
●
If the battery is not charged enough, encoding will not be done.
●
Adjust the volume of the external audio source to a suitable level and encode it.
If the volume level is extremely high, the sound quality may not be good.