Samsung SM-N900TZWETMB - Manual (Page 134)

128
Camera and Camcorder Settings
This section describes the different settings that you can
configure on your camera. Not all of the following options are
available in both still camera and video camera modes. The
available options vary by mode.
1. From the viewfinder, tap (Quick Settings) ➔
(Camera Settings).
2. The follow settings are located under the Camera,
Camcorder, and General tabs. The settings that are
displayed will depend on what camera mode you are
in.
Camera:
• Photo size: Select a resolution for photos. Use higher
resolution for higher quality. Higher resolution photos take up
more memory.
• Burst shot: allows several photographs to be captured in quick
succession by touching and holding the Camera button.
• Tap to take pics: allows you to tap the screen to also take a
new picture (vs using the Camera button).
• Face detection: allows you to adjust the camera focus based
on face detection technology.
• Metering: allows you to set how the camera measures or
meters the light source: Center-weighted, Matrix, or Spot.
• ISO: determines how sensitive the light meter is on your digital
camera. Choose from Auto, 100, 200, 400, or 800. Use a
lower ISO number to make your camera less sensitive to light, a
higher ISO number to take photos with less light, or Auto to let
the camera automatically adjust the ISO for each of your shots.
• Smart stabalization: compensates for camera movement.
• Save as: allows you to assign rich tone usage to an image.
Camcorder:
• Video size: Select a resolution for videos. Use higher resolution
for higher quality. Higher resolution videos take up more
memory.
• Video stabilization: Activate or deactivate Optical Image
Stabilization.
• Audio zoom: when active, allows you to focus your
microphone on a zoomed area during video recording.