Installing/removing the battery, Charging the battery – Samsung SWGQ105SV-XAR User Manual
Page 32
32
SGH-Q105
October 31, 2001
Installing/Removing the Battery
SGH-Q105 User Manual
7.
Turn the phone On by pressing and holding
the “End” button.
Installing/Removing the
Battery
To install the battery:
1.
Insert the battery into the guide slots on the
backside of the phone.
2.
Slide the battery up until you hear it lock into
place
To remove the battery:
1.
Turn the phone off (by pressing and holding
“End” until the closing animation sequence
begins.)
2.
Push the button on top of the battery and
slide the battery down.
Charging the Battery
The SGH-Q105 is powered by a Li-Ion battery
capable of being recharged using a Samsung
desktop or travel charger. The phone can be used
while the phone is being charged. If the phone is
turned off, a battery charge indicator is displayed
on the screen.
Note:
You must fully charge the battery prior to
using the phone the very first time. A full charge
takes approximately 200 minutes.
To charge the battery
1.
Connect the travel charger adapter to the
port located on the bottom of the phone.