Samsung SEC-R470NBAUSC - Manual (Page 26)

23
Two-Touch Dialing
Memory locations 10 through 99 are special Two-Touch dialing
locations.
Example: For location number 13, briefly press , then press and hold
until the name and number appear in the display and the number is
dialed.
Three-Touch Dialing
Memory locations 100 through 999 are special Three-Touch
dialing locations.
Example: For location number 113, briefly press , briefly press
again, then press and hold until the name and number appear
in the display and the number is dialed.
Pause Dialing From a Contacts Entry
• If you speed dial a contact that contains (two-second) P pause(s)
simply wait for the pauses to pass and the dialing to complete.
• If you speed dial a contact that contains (hard) W pause(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
Making a Call — Quick Search Dialing
Use the Quick Search feature to dial
any number stored in your Contacts
list by pressing the number keys that
correspond to the first few letters of
a Contact name. (For more
information, refer to “Quick Search”
on page 125.)
Quick Search Dialing a Contact
To find and dial a Contact, do the
following:
1. In standby mode, press the number keys that correspond
to the first few letters of the Contact name, as shown.
2. Press the Up navigation key.
The Contacts list screen
appears showing the desired
Contact name, as shown.
3. If needed, use the Up and
Down navigation keys to
highlight the Contact you wish
to call.