Samsung EC-WB1100BPRUS - Manual (Page 60)

Shooting in the dark
Shooting options 59
Icon Description
Red-eye Fix:
• The flash fires twice when the subject or background is dark. The
camera corrects red-eye through its advanced software analysis.
• There is an interval between the 2 bursts of the flash. Do not move
until the flash fires a second time.
Available options may differ depending on the shooting conditions.
• Flash options are not available if you set burst options or select Self-Portrait or
Blink Detection.
• Make sure that your subjects are within the recommended distance from the
flash. (p. 132)
• If light from the flash is reflected or there is a substantial amount of dust in the
air, tiny spots may appear in your photo.
• In some modes, you can also set the flash option by pressing [m], and then
selecting Flash.
Adjusting the ISO sensitivity
The ISO sensitivity is the measure of a film’s sensitivity to light as defined by the
International Organization for Standardization (ISO). The higher ISO sensitivity you
select, the more sensitive to light your camera becomes. Use a higher ISO sensitivity
to capture better photos and reduce camera shake when not using the flash.
1 In Shooting mode, press [m].
2 Select ISO.
3
Select an option.
• Select to use an appropriate ISO sensitivity based on the brightness of
the subject and lighting.
• Higher ISO sensitivities may result in more image noise.
• If you set the ISO option to , the resolution may change to or smaller.