Samsung YH-820MC-XAA - Manual (Page 27)

53
Contrast Settings
ENG
Recording Settings
52
In the Menu, use the SCROLL UP/SCROLL DOWN buttons to select Settings,
and then press the SELECT button.
1
Use the SCROLL UP/SCROLL DOWN buttons to select Contrast.
2
Press the SELECT button until the desired screen
contrast appears.
● The setting range of the contrast, which adjusts the contrast of
the screen, is 0 to 4.
3
SRS settings
Record Settings
Backlight-3sec
Contrast- 2
Settings
In the Menu, use the SCROLL UP/SCROLL DOWN buttons to select Settings,
and then press the SELECT button.
1
Use the SCROLL UP/SCROLL DOWN buttons to select P.saver screen.
2
Press the SELECT button until the desired screen
power save time appears.
● Off → 15 sec → 30 sec → 45 sec → 1 min
● If the selected time elapses while playing music, the screen
switches to power save mode. In power save mode, the
music continues to play but the music information is not
displayed on the screen.
● Press the √» button in power save mode to return to the
normal playback screen.
3
Record Settings
Backlight-3sec
Contrast-2
P.Saver- 3sec
Settings
Power Save Screen Settings
In the Menu, use the SCROLL UP/SCROLL DOWN buttons to select Settings,
and then press the SELECT button.
1
Use the SCROLL UP/SCROLL DOWN buttons to select Backlight.
2
Press the SELECT button until the desired
Backlight On-Time appears.
●
Off, 3, 5, 10, 15, 30seconds and Always are available for
Backlight-On Time.
3
EQ-Off
SRS settings
Record Settings
Backlight- 3sec
Settings
In the Menu, use the SCROLL UP/SCROLL DOWN buttons to select Settings,
and then press the SELECT button.
1
Use the SCROLL UP/SCROLL DOWN buttons to select Record Settings,
and then press the SELECT button.
2
Use the SCROLL UP/SCROLL DOWN buttons to select Sampling and Bit Rate,and
then briefly press the SELECT button to make the desired recording setting.
● Complete the desired setting, and then press the MENU button to go to the main menu.
● Sampling: Each time the Select button is pressed, the selection toggles between 32KHz
and 44KHz.
● Bit Rate: Each time the Select button is pressed, the selection changes as follows:
96 ➔ 128 ➔ 160Kbps.
● Selecting a higher bit rate results in better quality sound, but uses more memory space.
3
EQ-Off
SRS settings
Record Settings
Sampling- 44khz
Bit Rate-128kbps
Record Settings
Settings N N N N o o o o tt tt e e e e
- Voice can be recorded only at
8KHz 32kbps.
Repeat-Off
Backlight Settings
✍