Samsung SC-D6550-XAC - Manual (Page 39)

ENGLISH
35 35
✤ The Date/Time function works in both REC and PLAY modes.
✤ The date and time are automatically recorded on a special data area of the tape.
1. Set the Power switch to REC or PLAY.
2. Press the MENU button.
■ The menu list will appear.
3. Move the Joystick up or down to select Display, then press the Joystick(OK).
4. Move the Joystick up or down to select Date/Time, then press the Joystick(OK).
5. Move the Joystick up or down to select the Date/Time display type, then press the
Joystick(OK).
■ Display type of the Date/Time: Off, Date, Time, Date&Time
6. To exit, press the MENU button.
[ Notes ]
■ The Date/Time will read 12:00 AM JAN. 1, 2005 in the following conditions.
- During playback of a blank section of a tape.
- If the tape was recorded before setting the Date/Time in the Camcorder.
- When the Lithium battery becomes weak or dead.
■ Before you use the Date/Time function, you must set the clock. See Setting the Clock on page 30.
The Camcorder : Display Menu Setting
Displaying the Date/Time
Move Select Exit MENU OK
REC Mode
√Display
LCD Bright
LCD Color
Date/Time
TV Display
Off
Date
Time
Date&Time
5
1
Move Select Exit MENU OK
REC Mode
√Display
LCD Bright
LCD Color
Date/Time
TV Display
3
√Off
√On