Samsung SC-D6550-XAC - Manual (Page 73)

ENGLISH
69 69
The Camcorder : Playback
✤ The Speaker works only in PLAY mode.
✤ When you use the LCD screen for playback, you can hear recorded sound from the built-in Speaker.
- Take the following steps to lower the volume or mute the sound while playing a tape
on the Camcorder.
1. Set the Power switch to PLAY.
2. Press the √/» (PLAY/STILL) button to play the tape.
3. When you hear sounds once the tape is in play, use the Quick menu selector to adjust the
volume.
■ A volume level display will appear on the LCD screen.
Levels may be adjusted from anywhere between 00 to 19 and you will not hear any sound
when the volume level is set on 00.
■ If you close the LCD screen while playing, you will not hear sound from the speaker.
[ Notes ]
■ When the Multi-AV cable is connected to the Camcorder, you cannot hear sound from the Built-In
Speaker and cannot adjust the volume.
■ The sound will return when you remove the connected Multi-AV cable from the jack of your Camcorder.
Controlling Sound from the Speaker
60min
0:46:00:11
† …
SP √
[05]
2
3