Samsung SPH-L710ZPBSPR - Manual (Page 127)

 Message: When enabled, your phone reads out the sender’s information when you receive a
message.
 Alarm: When enabled, your phone reads out alarm information when an alarm sounds.
 Calendar event info: When enabled, your phone reads out event information when a
reminder sounds.
Power Saving Mode Settings
Configure Power saving mode settings to conserve battery power.
1. Press and then tap > Settings > My device.
2. Tap Power saving mode to configure options:
 Tap the ON/OFF switch next to Power saving mode to turn the mode On or Off. Power
saving mode must be turned On to configure settings.
 CPU performance: When enabled, the maximum performance of the device’s CPU (Central
Processing Unit) is disabled to conserve battery power. Tap the check box beside the option
to enable or disable it.
 Screen output: When enabled, the frame refresh rate and brightness level are reduced to
conserve power. Tap the check box beside the option to enable or disable it.
 Disable haptic feedback: When enabled, Haptic feedback is disabled to conserve battery
power. Tap the check box beside the option to enable or disable it.
Note: Tap Learn about Power saving mode to view information about these settings.
Accessories Settings
Configure your device’s behavior when it is connected to an optional dock (not included).
1. Press and then tap > Settings > My device.
2. Tap Accessories to configure settings:
 Dock sound: When enabled, a sound plays when you insert and remove the device from the
dock.
 Audio output mode: When enabled, audio plays through the dock speakers when the device
is docked.
 Desk home screen display: When enabled, displays a special screen when the device is
docked.
 Audio output: Choose a destination for audio output when you connect to devices via HDMI
cable.
Settings 117