Samsung HMX-U20LN-XAC - Manual (Page 33)

first time settings
Built-in rechargeable battery
Your camcorder includes a built-in rechargeable battery that retains the date and time settings even
after the power is turned off.
If the battery is depleted, the current date/time values are reset to the default values. You need to
recharge the built-in rechargeable battery (see below), and then re-set the current date and time.
Charging the built-in rechargeable battery
The built-in battery is always recharged while your camcorder is connected to the AC power or while
the battery is inserted.
If the camcorder is not in use for about 2 weeks without connecting to the AC power or inserting the
battery, the built-in battery fully discharges. If this occurs, charge the built-in battery by connecting to
the supplied AC adaptor for 24 hours.
•
•
•
•
TURNING THE POWER ON AND SETTING
THE DATE AND TIME
Set the date and time of your local area when you turn on the camcorder for the first time. If
you do not set date and time, the date and time screen appears every time you turn on your
camcorder.
1. Press the Power ( ) button to turn on the
camcorder.
When you turn on your camcorder for the first
time, the Date/Time Set screen appears.
2. Set each date or time value by pressing the /
buttons. Press the OK button after you set each
date or time value. The cursor moves to the next
value.
3. After you press the OK button after selecting AM or PM, the
camcorder exits the Time and Date screen.
•
The year can be set up to 2039.
23
%BUF5JNF
4FU
 +"/
Month Day Year Hr Min
  ". 
0, .PWF