Getting ready to start recording, Inserting/ejecting a memory card (not supplied) – Samsung HMX-U20LN-XAC User Manual
Page 35
To insert a memory card
1. Open the memory card cover by sliding
the OPEN lever as shown in the figure.
2. Insert the memory card into the card slot
until it softly clicks.
Make sure that the SD/SDHC card
logo is facing up and the camcorder is
placed as shown in the figure.
3. Close the memory card cover.
•
To eject a memory card
1. Open the memory card cover by sliding
the OPEN lever as shown in the figure.
2. Gently push the memory card to eject it.
3. Close the memory card cover.
INSERTING/EJECTING A MEMORY CARD
(NOT SUPPLIED)
To avoid the data loss, turn off the camcorder by pressing the Power ( ) button before inserting or
ejecting the memory card.
Be careful not to push the memory card too hard. The memory card may suddenly pop out.
•
•
Your camcorder supports only SD (Secure Digital) and SDHC (Secure Digital High Capacity) cards.
The compatibility with the camcorder may vary depending on the manufacturer and the type of the
memory card.
getting ready to start recording
25
Label pasting portion