Samsung LNR328WX-XAA - Manual (Page 30)

English- 25
O P E R AT I O N
3
Press the ENTER button
to select “Start”.
The TV will begin memorizing
all of the available channels.
The TV automatically cycles
through all of the available
channels and stores them in
memory. This takes about one
to two minutes.
Press the ENTER
button at
any time to interrupt the
memorization process and return
to the “Channel” menu.
2
Press the UP/DOWN
buttons to select
“Auto Program”.
Press the ENTER button.
1
First, select the correct
signal source (Air, STD,
HRC, or IRC).
See steps 1~2 on the
previous page.
4
After all the available
channels are stored, the
“Channel” menu reappears.
Press the EXIT button
to exit.
Storing Channels in Memory (Automatic Method)
Alternate method:
Press the AUTO PROG. button under the remote's cover.
To stop the search before it has
finished, press the ENTER
button with “Stop” selected.
BN68-00883A-04Eng.qxd 1/25/06 3:53 PM Page 25