Samsung SEC-R350WRAMTR - Manual (Page 36)

33
Add Pauses to Contacts Numbers
Calls to automated systems such as banking services often
require a password or account number. Instead of manually
entering these numbers, you can store them in a Contacts entry
with the phone number and with special characters called
pauses, up to a maximum of 32 digits.
• 2-Sec Pause — Stops the calling sequence for two seconds, then
sends the remaining digits.
• Wait — Stops the calling sequence until the phone receives further
input.
Note: You can enter multiple Waits to extend the length of a pause. For
example, two consecutive Waits cause a total pause time of four
seconds. Keep in mind that pauses count as digits towards the 32-digit
maximum.
To add pauses to a Contacts entry number, do the following:
1. Find the Contacts entry associated with the number you
want to include one or more pauses. (For more
information, refer to “Finding a Contacts Entry” on
page 30.)
2. Select and edit the desired number. (For more information,
refer to “Editing a Contacts Entry” on page 32.)
3. Press Options. The following pause options appear in the
display:
• 2-Sec Pause — A 2-second pause after which dialing resumes.
• Wait — A hard pause (waits for input from you).
4. Select the desired pause to add it to the number sequence.
5. When you’re finished entering information, press SAVE
(
) to store the number to Contacts.
Pause Dial from Contacts
1. If you stored the number using 2-second pause(s), simply
recall the number from Contacts.
2. If you stored the number using Wait(s), recall the number
from Contacts
and wait for the appropriate prompt from
the dialed number.
3. Press to dial the number.
Edit an Existing E-mail Address
1. Find the Contacts entry you want to edit. (For more
information, refer to “Finding a Contacts Entry” on
page 30.)
2. Highlight the desired Contacts entry, then press Edit.
The Edit Contact screen appears in the display.
3. Highlight the Email field.
4. Use either keypad to edit the e-mail address. (For more
information, refer to “Entering Text” on page 14.)
5. Press SAVE ( ) to save your changes.