Samsung SEC-R350WRAMTR - Manual (Page 62)

59
• Go to — Lets you access the following list of your phone’s features
and functions:
– Contacts
– Calls
– Messages
– MetroWEB
– @metro
– VoiceSVC
– Multimedia
– Tools
– Settings
• Check — Lets you say a single command (such as “Status”) to verify
your phone's: Status, Signal, Coverage, Battery, or My phone #.
Note: Speaking clearly, say the command that you want to use. If VoiceSignal
does not recognize a command, it prompts you to repeat the
command. If VoiceSignal still does not recognized the command, it
tells you “Sorry, no match found” and cancels voice recognition.
Voice Command Tips:
• Make sure you wait for the beep before speaking.
• Speak clearly at a normal volume, as if you were talking on the phone.
Voice Settings
To access the Voice Settings menu:
ᮣ In Standby mode, select Menu ( ) ➔ Tools ➔
Voice SVC ➔ Voice Settings.
Choice Lists
When Vsuite cannot recognize a name or number, it displays a
choice list of up to three possible choices, and prompts you to
confirm the correct one.
You can select how Vsuite will use choice lists with name dialing,
digit dialing, and Contacts.
To change the way Vsuite uses choice lists:
1. From the Voice Settings menu, select Choice Lists. The
following options appear in the display:
• Automatic — Vsuite displays a choice list only when it is not sure
if it has correctly recognized the name or number.
• Always On — Vsuite always displays a choice list, even when
there is only one choice.
• Always Off — Vsuite never displays a choice list.
2. Select a new setting or press to return to the Voice
Settings menu.
Sensitivity
1. From the Voice Settings menu, select Sensitivity.
2. Use the Up and Down navigation keys to adjust the
selected Sensitivity setting incrementally between Reject
More spoken commands or names and Reject Less
spoken commands or names.