Samsung SPH-M540ZPASPR - Manual (Page 39)

Phone Bas
ics
Section 2A. Phone Basics 23
Dialing Options
When you enter numbers in standby mode, you will
see a variety of dialing options displayed as softkeys on
the phone’s screen.
To send a message to the number, press Send Msg
(left softkey).
– or –
To initiate a dialing option, press Options (right softkey)
and choose one of the following options.
ⅷ Contact Details: Displays the details for a Contact if the
entered number matches a previously created entry.
ⅷ Save: Enter a seven-digit or ten-digit number (phone
number and area code) and press Options > Save to
save the phone number in your Contacts. (See
“Saving a Phone Number” on page 29.)
ⅷ Hard Pause: Enter digits and then use this feature to
enter a hard pause within a number string (the
phone waits for your input). To continue dialing, you
must press the
key. (See “Dialing and Saving
Phone Numbers With Pauses” on page 30.)
ⅷ 2sec Pause: Enter digits and then use this feature to
enter a 2 second delay within a number string (the
phone continues dialing after 2 seconds without any
additional keys being pressed). (See “Dialing and
Saving Phone Numbers With Pauses” on page 30.)
Tip To speed dial a phone number from standby mode,
press and hold the speed dial number. If the speed
dial number is two digits, enter the first digit, and then
press and hold the second digit. (For information on
setting up speed dial numbers, see “Assigning
Speed Dial Numbers” on page 87.) (This feature will
not work when you are roaming off the Sprint
National Network; when roaming you must dial using
eleven digits [1 + the area code + the seven-digit
phone number].)
Sprint M540.book Page 23 Tuesday, April 7, 2009 3:38 PM