Connecting to an antenna, Plug & play (initial setup), Getting started – Samsung UN55C9000ZFXZA User Manual
Page 10
10
Getting Started
English
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and antenna.
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
P button. Plug & Play is available only when the Input source is set to TV.
✎
To return to the previous step, press the Red button.
1
Turn on the TV and
Touch Control.
y
Turn on the Touch Control and then tap OK on
your remote.
✎
It may take about one minute to establish a
wireless connection between the TV and Touch
Control using the Samsung Wireless LAN
Adapter.
2
Connect the Samsung
Wireless LAN Adapter
y
Connect the Samsung Wireless LAN Adapter to the TV. You can connect the Samsung
Wireless LAN Adapter using the method shown on page 35.
y
If the connection fails, reconnect the Samsung Wireless LAN Adapter and then try
again.
3
Selecting a language
Press the
▲ or ▼ button, then press the
ENTER
E button.
Select the desired OSD (On Screen Display) language.
4
Selecting Store Demo
or Home Use
Press the
◄ or ► button, then press the
ENTER
E button.
y
Select the Home Use mode. Store Demo Mode is for retail environments.
y
To return the unit’s settings from Store Demo to Home Use (standard): Press the
volume button on the TV. When you see the volume OSD, press and hold
MENU
for 5
sec.
5
Selecting an antenna
Press the
▲ or ▼ button, then press the
ENTER
E button. Select Air, Cable or Auto.
6
Selecting a channel
Press the
▲ or ▼ button, then press the
ENTER
E button. Select the channel source
to memorize. When setting the antenna source to Cable, a step appears allowing you to
assign numerical values (channel frequencies) to the channels. For more information, refer to
Channel
→ Auto Program (p. 16).
✎
Press the
ENTER
E button at any time to interrupt the memorization process.
7
Setting the Clock
Mode
Set the Clock Mode automatically or manually.
y
Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.
y
Manual: Allows you to manually set the current date and time (p. 26).
8
View the HD
Connection Guide
The connection method for the best HD screen quality is displayed.
9
Enjoy your TV.
Press the
ENTER
E button.
If You Want to Reset This Feature...
O
MENU
→ Setup → Plug & Play →
ENTER
E
ANT OUT
VHF/UHF Antenna
Antenna Cable (Not Supplied)
or
Cable
[UC9000-NA]BN68-03088A-02L03.indb 10
2010-09-01 오후 4:24:15