Samsung HLT5676SX-XAA - Manual (Page 66)

English - 66
Using the Photo (JPEG) List
You can play back the JPEG files saved on a memory device in various ways.
1 After switching the mode to WISELINK, select a memory device that you have installed.
(Refer to page 65)
2 Press the ENTER button to select Photo.
JPEG files and existing folders are displayed.
3 Press the ▲/▼/◄/► buttons to select a file, then press the ENTER button.
➢ Pressing the button over a photo icon shows the currently selected photo in full
screen.
➢ Press the INFO button and select View to view a photo image at its original size.
➢ Pressing the button over a folder icon shows the JPEG files included in the folder.
➢ While a full screen is displayed, ◄ or ► button will let you see another photo image in
the same folder.
➢ Press the PLAY/PAUSE button when a Photo icon is selected to start a Slide Show.
To exit WISELINK mode, press the WISELINK button on the remote control.
➢ Moving to a photo may take a few seconds because the file needs to be loaded.
At this point, the icon will appear.
➢ This menu shows only the files whose extension is jpeg (or jpg). Files with other
formats such as gif or tiff will not be displayed.
➢ Fifteen thumbnail photos are displayed per page.
➢ The thumbnails are numbered from left to right and from top to bottom, from 1 to 15.
➢ Folders are displayed first and they are followed by all JPEG files in the current folder.
The folders and JPEG files are sorted in alphabetical order.
➢ If the photo is displayed in full screen, you can zoom in and out or rotate the photo on
the screen. (Refer to pages 69~70)
➢ It takes a while to show JPEG files as thumbnail images.
➢ WISELINK for this product supports JPEG files up to 8K x 8K pixels. For progressive
JPEG files or files whose size exceeds 8MB, the photo will be displayed as a
thumbnail only. When trying to view a progressive JPEG file, the “ Not supported
mode” message will appear. When trying to view a file exceeding 8MB, the “This file
is too large to decode” message will appear.
Press the WISELINK button on the remote control to turn on the WISELINK mode.
Continued...
: Folder icon
: Photo icon
: Move to the previous
folder stage icon
Move Enter Return
709x531
2006-1-30
1/14
Move Enter Photo Menu Return
BP68-00630A-Eng_3.indd 66 2007-03-30 ｿﾀﾈﾄ 5:22:50