Samsung SC-X105L-XAA - Manual (Page 114)

While the camcorder is inside your bag or backpack, you can attach the External Camera Module mounted on the Rubber
Mount to anywhere with help of the Short and Long Mount Bands.
ENGLISH
110 110
Using the External Camera Module : Wearing the External Camera Module
Using the Short and Long Mount Bands
1. Run the strap of Long Mount Band (or Short Mount Band)
through both of the large slots on the rubber mount as illustrated.
2. Run the strap through the buckle to adjust the tightness.
3. Fasten the strap.
Notes
✤ Adjust and shorten the extension cable connected to the External Camera Module to avoid accidental catching of surrounding objects.
Otherwise, the extension cable may disconnect or cause an accident.
✤ Dropping the External Camera Module or bumping it to other objects may cause device failure. When using the device,
you must attach it to the rubber mount, and be careful not to drop or strike it.
✤ A direct contact of the Rubber Mount with your skin for a long period of time may cause skin irritation or allergy. Avoid a long term contact.
1
2
3
Rubber Mount
Attaching the Ferrite Core
1. Open the hook (locking part) of the Ferrite Core.
2. Place the Ferrite Core near to the Camera’s end,
and loop the cable through the Ferrite Core as
illustrated.
3. Close and fix the Ferrite Core by pressing both
locking ends until it clicks.
Attenuating Unwanted signals When Using External Camera
To attenuate unwanted signals, before using the External Camera attach the Ferrite Core provided as an
accessory to the cable.
1 2
3