Maintenance, After finishing a recording – Samsung SC-D903-XAC User Manual
Page 104
ENGLISH
100
100
Maintenance
✤ At the end of a recording you must remove the power source.
✤ Leaving the Lithium Ion Battery pack on the camcorder can reduce the life span of the battery.
1. Slide the TAPE EJECT switch in the direction of the arrow.
■
Opening the cassette door ejects the tape automatically.
■
Please wait while the tape is completely ejected.
2. After removing the tape, close the door and store the camcorder in a dust free
environment.
■
Dust and other foreign materials can cause block-shaped noise or jerky images.
3. Set the power switch to the OFF mode.
4. Disconnect the power source or remove the Lithium Ion Battery Pack.
■
Hold down the BATTERY RELEASE button and slide the battery pack in the direction of the arrow.
After finishing a recording
1
2
3
4
00792B SCD903 USA (64~109) 5/14/04 10:47 AM Page 100