Samsung SC-D903-XAC - Manual (Page 39)

ENGLISH
35 35
Adjusting the LCD during PLAY
✤ You can adjust the LCD during playback.
✤ The adjustment method is the same procedure as used in CAMERA mode. (see page 32)
The Speaker works in PLAYER mode only.
■ When you use the LCD screen for playback, you can hear recorded sound from the built-in
Speaker.
-
Follow the instructions below to decrease or mute speaker volume in the PLAYER mode.
1. Set the power switch to PLAYER mode.
2. Press (PLAY/STILL) to play the tape.
3. When you hear sounds once the tape is in play, use the MENU SELECTOR to adjust the
volume.
■ A volume level display will appear on the LCD.
Levels may be adjusted from anywhere between 00 to 19.
■ If you close the LCD while playing, you will not hear sound from the speaker.
Note
■ When the cable is connected to the Audio/Video jack, you cannot hear sound from the speaker
and cannot adjust the volume.
Basic Recording
Controlling Sound from the Speaker
0 : 2 3 : 4 7
5 5 min
1 0 : 0 0 A M
J A N . 10 , 2 0 0 4
VOL. [ 1 1 ]
<3-2>
2
3-1
00792B SCD903 USA (28~63) 5/14/04 10:45 AM Page 35