Samsung SC-D903-XAC - Manual (Page 71)

ENGLISH
67 67
Advanced Recording
Audio dubbing
✤ The AUDIO DUBBING function only works in PLAYER Mode.
✤ You can add sound to the original sound on a pre-recorded tape, recorded in SP mode with 12bit sound.
✤ Use the internal and external microphones or other audio equipment.
✤ The original sound will not be erased.
Dubbing sound
1. Set the camcorder to PLAYER mode.
■ If you want to use an external microphone, connect the microphone to the
external MIC input jack on the camcorder.
2. Press the (PLAY/STILL) button and find the time frame of the scene to
be dubbed.
3. Press the (PLAY/STILL) button to pause the scene.
4. Press the A.DUB button on the Remote Control.
■ A.DUB will be displayed on the LCD.
■ The camcorder is in a ready-to-dub state for dubbing.
5. Press the (PLAY/STILL) button to start dubbing.
■ Press the (STOP) button to stop the dubbing.
Notes
■ You can not use the audio dubbing function while playing a write protected video tape.
■ When adding sound using the built-in microphone, make sure not to connect any cables to the camcorder.
■ You can not dub sound on a pre-recorded tape in LP mode or 16 bit mode.
MIC
A/V
DC IN
00792B SCD903 USA (64~109) 5/14/04 10:46 AM Page 67