Samsung SPH-L520ZWASPR - Manual (Page 145)

3. Configure these settings:
 Add Wi-Fi network: Connect to a new Wi-Fi network. For more information,
see Wi-Fi .
 Scan: Search for available Wi-Fi networks.
 Wi-Fi Direct: Connect to other Wi-Fi Direct devices. For more information, see Wi-Fi
Direct .
Other Wi-Fi Settings
Set up and manage wireless access points.
1. Press and touch > Settings > Connections tab.
2. Touch Wi-Fi, and then touch the OFF/ON switch to turn Wi-Fi on. Wi-Fi must be on to
configure settings.
3. Touch to configure these settings:
 Advanced:
• Network notification: Phone alerts you when a new Wi-Fi network is available.
• Keep Wi-Fi on during sleep: Specify when to switch from Wi-Fi to mobile data
for data communications, when the phone goes to sleep (when the backlight
goes out). This setting can affect data usage, and the behavior of devices you
connect to your phone, such as when using it as a hotspot.
• Auto network switch: Auto switch between Wi-Fi networks and mobile
networks.
• Wi-Fi timer: Automatically connect or disconnect from a Wi-Fi network, using the
Starting time and Ending times you set.
• MAC address: View your phone’s MAC address(not configurable).
• IP address: View your phone’s IP address (not configurable).
 WPS push button: Set up a connection to a WPS (Wi-Fi Protected Setup) router or
other equipment.
 WPN PIN entry (not configurable): View the PIN used by your phone to set up a
PIN-secured connection to a Wi-Fi router or other equipment.
 Help: Learn about setting up and using Wi-Fi networks, and other settings.
Settings 134