Samsung SPH-D710AAABST - Manual (Page 75)

2C. Settings 61
Settings
Ⅲ Tilt to zoom : Once enabled, you must be on a
screen where content can be zoomed. In a single
motion, touch and hold two points on the display
then tilt the device back and forth to zoom in or
out.
Ⅲ Pan to edit : Once enabled, touch and hold a
desired application shortcut icon or widget on the
screen. Once it detaches, move the device left or
right to migrate it to a new location.
Ⅲ Double tap : Once enabled, a double tap on the
top of the phone takes you to the top of the list.
Ⅲ Turn over to mute : Once enabled, mute incoming
calls and any playing sounds by turning the
device over display down on a surface. This is the
opposite of the pickup to be notified gesture.
Developer Options
Use the Developer Options to set options for
application development.
ᮣ Press and tap > Settings > Developer
options .
USB Debugging
When enabled, this allows debugging when the phone
is attached to a PC by a USB cable.
ᮣ Press and tap > Settings > Developer
options > USB debugging . A checkmark indicates
activation.
Development Device ID
This is the identification number for your phone when
using it as a development tool.
Allowing Mock Locations
If you are a developer who is testing a GPS
applications using this device, you can use mock
locations to tell the device that the phone is at different
GPS locations. The phone is allowed to “mock” the
coordinates.
ᮣ Press and tap > Settings > Developer
options > Allow mock locations . A checkmark
displays to indicate activation.
Important: These features are used for development
purposes only.
Important: These features are used for development
purposes only.