Samsung SCX-8128NA-XAA - Manual (Page 46)

Media and tray_ 46
• Do not load paper that does not have space between labels running the
same direction as the paper is being fed. Otherwise, it could cause
paper jams.
Card stock/ Custom-sized paper
• Do not print on media smaller than 98 mm (3.8 inches) wide or 148 mm
(5.8 inches) long.
• In the software application, set margins to at least 6.4 mm (0.25 inches)
away from the edges of the material.
Letterhead/Preprinted paper
• Preprinted paper must be printed with heat-resistant ink that will not
melt, vaporize, or release hazardous emissions when subjected to the
machine’s fusing temperature of about 170°C (338 °F) for 0.1 second.
• Preprinted paper ink must be non-flammable and should not adversely
affect machine rollers.
• Forms should be sealed in a moisture-proof wrapping to prevent
changes during storage.
• Before you load preprinted paper, verify that the ink on the paper is dry.
During the fusing process, wet ink can come off preprinted paper,
reducing print quality.
Glossy
Load a single sheet of paper into the multi-purpose tray at a time,
glossy side facing down.
• Recommend media: Glossy paper (Letter) for this machine by HP
Brochure Paper (Product: Q6611A) only.
• Recommend media: Glossy paper (A4) for this machine by HP Superior
Paper 160 glossy (Product: Q6616A) only.
Single-sided double-sided
Standard tray/
Optional dual
cassette feeder
Face up Face down
Multi-purpose tray Face down Face up