Samsung SEPA920WSAQST - Manual (Page 129)

Section 2H: Using Your Phone’s Voice Services 107
V
o
ice Ser
vice
s
Voice Launch
Voice Launch allows you to configure how to launch
Voice-Activated dialing.
To access voice launch:
1. Press Menu > Settings > Voice Service.
2. Select Voice Launch and press .
3. Select Talk Key or Talk Key and Flip Open and press .
Using Call <Name or #>
You can voice dial from your phone with a single command by saying “Call”
followed by a name or nickname (see contact list documentations for
details) and (optionally) a label stored in your contact list, or “Call” followed
by a valid phone number. You can also say “Call” by itself and be prompted
for the name or number.
Calling Contacts Entries
To place a call using Call <Name or #>:
1. Press and hold .
2. Say “Call” followed by the name and the label for that number. For
example, say “Call John Mobile.” The phone dials the number
stored for the contact “John” with the label “Mobile.”
If the location recognized for the name does not have a number stored in
Contacts, your phone will play the message “No number available, John
Smith, Mobile,” and then launch the Contacts application for that name.
If a name has only a single number, or if you know the name but are not
sure which number to call, say “Call” followed by the name only. For
example, say “Call John.” If the name is recognized and there is only one
number for the name, your phone immediately places the call. If there are
multiple numbers stored for the contact, the phone prompts you with