Selecting camera settings – Samsung SEPA920WSAQST User Manual
Page 150
128
Section 2J: Using the Built-in Camera and Camcorder
Setting the Camera Self-timer
To activate the Self-timer:
1.
From camera mode, select Options (
).
2.
Press the volume key up to select Self-timer and
press .
3.
Highlight the length of delay you want the timer to use (Off, 5
Seconds or 10 Seconds) and press
.
4.
Press
when you are ready to start the timer. (It is displayed
in the upper right portion of the main LCD during the Self-timer
countdown.)
5.
Get ready for the picture. (When the timer is started, the phone will
begin to beep and the timer numbers turn red when there is only
three seconds left.)
To cancel the Self-timer after it has started:
ᮣ
Press .
Using the Zoom
This feature allows you to zoom in on an object when you take a picture.
Depending on your resolution settings, you can adjust the zoom up to five
levels.
To use the zoom:
1.
From camera mode, press
left or right.
2.
Press
to take the picture. (The picture will automatically be
saved in the In Phone folder.)
Selecting Camera Settings
To select your camera settings:
1.
From camera mode, select Options (
).
2.
Select Settings and press
.
Note:
Zoom is not available when the resolution is set to 1280x960.