Alert notification, Silence all, Display settings – Samsung SEPA920WSAQST User Manual
Page 70: Changing the text greeting
48
Section 2B: Controlling Your Phone’s Settings
Alert Notification
Your phone can alert you with an audible tone when you change service
areas, once a minute during a voice call, when the signal fades, when
powering your phone on or off, or when a call has been connected.
To enable or disable alert sounds:
1.
Select Menu > Settings > Sounds > Alerts.
2.
Select Minute Beep, Service, Connect, Sig. Fade Tone, or
Power On/Off and press
.
3.
Select On or Off and press
.
Silence All
There may be times when you need to silence your phone entirely. The
phone’s Silence All option allows you to mute all sounds without turning
your phone off.
To activate Silence All:
ᮣ
With the phone open, press and hold the volume
key down in standby mode. (The screen will display “Silence All.”)
To deactivate Silence All:
ᮣ
Press the volume key up repeatedly to select a desired volume level.
Display Settings
Changing the Text Greeting
The text greeting can be up to 14 characters and is displayed on your
phone’s screen in standby mode. You may choose to keep the phone’s
default greeting (“Qwest”), or you may enter your own custom greeting.
To display or change your greeting:
1.
Select Menu > Settings > Display > Greeting > Custom.
2.
Enter a custom greeting using your keypad and press
“Entering Text” on page 39.) (To erase the existing greeting one