Samsung BD-HM59-ZA - Manual (Page 8)

Connections
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the
product to the HDMI IN jack on your TV.
- Do not connect the power cord to the wall outlet until you have made all the other
connections.
- When you change the connections, turn off all devices before you start.
Audio
Video
● ✎ NOTES
● ■
If you use an HDMI-to-DVI cable to connect to your display device, you must also
connect the Digital Audio Out on the player to an audio system to hear audio.
● ■
An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
● ■
Depending on your TV, certain HDMI output resolutions may not work. Please refer to
the user manual of your TV.
● ■
When you connect the player to your TV using the HDMI cable or to a new TV, and
then turn it on for the first time, the player automatically sets the HDMI output
resolution to the highest supported by the TV.
● ■
A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off
in the menu.
● ■
To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High
speed HDMI cable.
● ■
HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection),
random noise appears on the screen.
Connecting to an Audio System
You can connect the Blu-ray player to an audio system using one of the methods
illustrated below.
- Do not connect the power cord to the wall outlet until you have made all the other
connections.
- When you change the connections, turn off all devices before you start.
●Method●1●●Connecting●to●an●HdMI●supported●AV●receiver
● ●
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the
product to the HDMI IN jack on your receiver.
● ●
Best quality (Recommended)
●Method●2●●Connecting●to●an●AV●receiver●with●dolby●digital●or●a●dTS●decoder
● ●
Using a digital Coaxial cable (not supplied), connect the Coaxial Digital Audio Out
jack on the product to the Digital Coaxial In jack of the receiver.
● ●
Good quality
● ●
You will hear sound only through the front two speakers with Digital Output set to
PCM.
Audio Audio
Method●2 Method●1
8