Samsung SMX-C14RN-XAA - Manual (Page 101)

English _91
LCD Brightness
You can adjust the brightness of the LCD screen to compensate for ambient lighting
conditions.
Pressing the Controlbutton ( ) will brighten the screen whereas pressing the Control
button ( ) will darken the screen.
A brighter LCD screen setting consumes more battery power.
If you adjust the LCD brightness when the ambient lighting is too bright, it is hard to see
the monitor indoors.
LCD Brightness does not affect the brightness of images to be stored.
You can adjust the LCD Brightness from -15 to 15.
•
•
•
•
•
•
Date/Time Display
You can set the date and time to display on the LCD screen.
• Before you use the “Date/TimeDisplay” function, you must set the date and time. page 35
Settings Contents On-screendisplay
Off Current date and time information is not displayed. None
Date Displays the current date. 01/JAN/2009
Time Displays the current time. 00:00
Date&Time Displays the current date and time. 01/JAN/200900:00
The date/time will read “01/JAN/200900:00” in the following conditions:
- The built-in rechargeable battery becomes weak or dead.
This function depends on the “DateType” and“TimeType”setting.
•
•
LCD Colour
You can change the colour impression of the screen with a variety of colour options by
adjusting the colour rate of red and blue.
When you set red and blue colour range, the higher the fi gures the brighter the LCD
screen will be.
You can adjust the LCD colour (red/blue) from -15 to 15, using the Control button
( /  /  /  / OK).
You can manipulate the colour displayed on the LCD screen by adjusting the colour ratio
of red and blue.
Adjusting the colour display of LCD screen does not affect the image to be recorded.
Higher the value will produce brighter LCD screen when adjusting colour range of red and blue.
•
•
•
•
•
•
0:00:00[245Min] STBY
LCD Brightness
0
Exit Adjust Ok
0:00:00[245Min] STBY
0
Exit Move Ok
0
LCD Colour
Blue
Red