Samsung SMX-C14RN-XAA - Manual (Page 26)

CONNECTING A POWER SOURCE
Be sure to charge the battery pack before you start using your camcorder.
Use IA-BH130LB battery pack only.
The battery pack may be charged a little at the time of purchase.
Battery pack insertion/ejection
It is recommended you purchase one or more additional battery packs to allow continuous use of your camcorder.
Inserting the battery pack
1. Slide and open the battery slot cover as shown in the diagram.
2. Insert the battery pack into the battery slot until it locks.
Make sure that the SAMSUNG logo is facing left while
the battery pack is placed as shown in the diagram.
3. Slide and close the battery slot cover.
Ejecting the battery pack
1. Slide and open the battery slot cover and push the Battery pack
release switch.
Gently push the Battery pack release switch in the direction
as shown in the diagram to eject the battery.
2. Pull the ejected battery out in the direction as shown in the diagram.
3. Slide and close the battery slot cover.
•
•
•
•
•
Store the battery pack separately from the camcorder
while not in use.
It is recommended to prepare an additional battery
pack for prolonged outdoor use.
Contact your nearest Samsung Electronics Service
Centre for purchasing additional battery packs.
•
•
•
preparation
Insert
Eject
[Battery pack release] Switch
16_English