Samsung SMX-C14RN-XAA - Manual (Page 49)

INSERTING / EJECTING THE MEMORY CARD
Inserting a memory card
1. Turn the camcorder off.
2. Slide and open the battery/memory card cover as shown in the diagram.
3. Insert the memory card into the memory card slot until it softly clicks
in the direction of the arrow shown in the diagram.
4. Close the cover.
Ejecting a memory card
1. Turn the camcorder off.
2. Slide and open the battery/memory card cover as shown in the diagram.
3. Slightly push the memory card inwards to pop it out.
4. Pull the memory card out of the memory card slot and close the cover.
Never format the built-in memory or memory card using a PC.
If you insert a memory card when the camcorder is on, the pop-up message will prompt you automatically
to select the storage type. (SMX-C13/C14 only)
If there is no memory card inserted, only the built-in memory will be available. (SMX-C13/C14 only)
Do not eject a memory card while it is being used in the camcorder. The memory card and its data may be
damaged.
Do not remove the power (battery pack or AC power adaptor) when accessing storage media with
recording, playback, format, delete, etc. The storage media and its data may be damaged.
•
•
•
•
•
English _39
CAUTION
As shown in the diagram, slide the memory card in with the label right.
In case the label of a memory card faces left when sliding the card into the slot, the camcorder may not
work, or the tip of the memory card may be damaged.