Samsung LNR1550PX-XAA - Manual (Page 51)

English-
46
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by fine tuning alone, then do the frequency adjustments to
the utmost and fine tune again. After the noise has been reduced, re-adjust the picture
so that it is aligned to the center of the screen.
PC D I S P L AY
2
Press the ENTER
button to select
“Image Lock”.
4
When you are satisfied with the settings, press the
MENU button repeatedly to return to normal viewing.
3
Press the UP/DOWN
buttons to select “Coarse”
or “Fine”, then press the
ENTER
button.
Press the LEFT/RIGHT
buttons to adjust the
screen quality, vertical
stripes may appear or the
picture may be blurry.
<Adjusting Coarse>
<Adjusting Fine>
1
Press the MENU button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select “PC”,
then press the ENTER
button.
Preset to PC mode by pressing the
SOURCE button on tne romote
control.
04 BN68-00816A-00.qxd 2/3/05 9:49 AM Page 46