Pause dialing from a contacts entry, Answering a call, Incoming – Samsung SCH-R560ZPACRI User Manual

Page 28: Call notification features, Set call ringer volume

Advertising
background image

25

Pause Dialing From a Contacts Entry

If you voice dial a contact that contains 2-Sec Pause(s) simply wait for

the pauses to pass and the dialing to complete.

If you voice dial a contact that contains Wait(s), wait for the appropriate

prompt(s) from the number you are calling (credit card number, bank
account number, and so on) and enter the appropriate response(s).

Answering a Call

Incoming

When you receive a call, the phone displays one of the following:

If the caller can be identified, the caller’s number (or name if it’s in your

Contacts) appears in the display.

If the caller cannot be identified, Call from unavailable #, Call from

restricted #, or no number appears in the display.

Tip: Assign pictures to Contacts entries. The entry’s assigned picture

appears in the display when you receive a call from that entry. (See
“Assigning a Picture to a Contacts Entry” on page 45).

The phone continues to notify you of the call until one of the
following events occur:

You answer the call.

The calling party ends the call.

The call is sent to voicemail.

Call Notification Features

Your phone notifies you of a call in a variety of ways.

Eight ring volume settings: Ringer Off, Vibrate, Low, Low/Medium,

Medium, Medium/High, High, or Vibrate/High.

Different ring types or melodies to distinguish callers.

Name display with caller ID. (If the caller’s name is programmed into

your Contacts).

Information about the last 90 each of incoming, missed, and outgoing

calls are automatically stored to a call log.

Set Call Ringer Volume

1.

In standby mode, press the Volume key on the left side of

the phone.

2.

Press the Volume key up or down to set the call ringer

volume as desired.

3.

Once you’re satisfied with the setting, press

or

.

The phone returns to standby mode.

Tip: You can also enter the Volume > Voice Calls sub-menu from standby

mode by pressing the Menu soft key, then selecting Settings

Sound

Settings

Volume

Voice Calls. Use the Volume key on the right side

of your phone to adjust the ringer volume setting.

Advertising
This manual is related to the following products: