Samsung SCH-R560ZPACRI - Manual (Page 47)

Understanding Your Contacts 44
5. When you’re finished changing the contents of a field,
press or . Your changes are saved and a
confirmation message appears in the display.
Add Pauses to Contacts Numbers
Calls to automated systems such as banking services often
require a password or account number. Instead of manually
entering these numbers, you can store them in a Contacts entry
with the phone number and with special characters called
pauses, up to a maximum of 32 digits.
• Wait — Stops the calling sequence until the phone receives further
input.
• 2-Sec Pause — Stops the calling sequence for two seconds, then
sends the remaining digits.
Note: You can enter multiple Waits to extend the length of a pause. For
example, two consecutive Waits cause a total pause time of four
seconds. Keep in mind that pauses count as digits towards the 32-digit
maximum.
To add pauses to a Contacts entry number, do the following:
1. Find the Contacts entry associated with the number you
want to include one or more pauses. (See “Finding a
Contacts Entry” on page 40 for more information.)
2. Select and edit the desired number. (See “Editing a
Contacts Entry” on page 43 for more information.)
3. Press the Options soft key. The following pause options
appear in the display:
• Wait — A hard pause (waits for input from you).
• 2-Sec Pause — A 2-second pause after which dialing resumes.
4. Select the desired pause to add it to the number sequence.
5. When you’re finished entering information, press or
to store the number to Contacts.
Pause Dial from Contacts
1. If you stored the number using 2-second pause(s), simply
recall the number from Contacts.
2. If you stored the number using Wait(s), recall the number
from Contacts and wait for the appropriate prompt from
the dialed number.
3. Press to dial the number.
Edit an Existing E-mail Address
1. Find the Contacts entry you want to edit. (See “Finding a
Contacts Entry” on page 40 for more information.)