Samsung SPH-L720ZKASPR - Manual (Page 147)

• Auto network switch: When enabled, your phone will automatically switch
between known Wi-Fi networks and mobile networks. Known Wi-Fi networks are
those you have already connected to.
• Wi-Fi timer: When turned On, your phone will automatically connect or
disconnect from a Wi-Fi network, using the Starting time and Ending times you
set.
• Install certificates: If you have certificates stored on an installed optional
memory card (not included), you can use this option to install the certificates.
• MAC address: (Not configurable) View your device’s MAC address, needed for
connecting to some secured networks.
• IP address: (Not configurable) View your device’s IP address.
 WPS push button: Set up a connection to a WPS (Wi-Fi Protected Setup) router or
other equipment.
 WPN PIN entry: View the PIN used by your device to set up a PIN-secured
connection to a Wi-Fi router or other equipment.
 Help: Learn about setting up and using Wi-Fi networks, and other settings.
Wi-Fi Direct
Wi-Fi Direct allows devices to connect to each other directly via Wi-Fi, without a Wi-Fi network
or hotspot, and without having to set up the connection. For example, your device can use Wi-Fi
Direct to share photos, contacts and other content with other Wi-Fi Direct devices.
1. Press and tap > Settings > Connections.
2. Tap Wi-Fi, and then tap the ON/OFF switch beside Wi-Fi to turn Wi-Fi On. Wi-Fi must
be On to configure Wi-Fi Direct settings.
3. Tap Wi-Fi Direct at the bottom of the screen. Your device automatically scans for
nearby Wi-Fi Direct devices, or you can tap Scan to start scanning.
4. After scanning for devices, select a device, and then follow the prompts to complete the
connection.
– or –
Touch Multi connect to create a connection to devices that support multi-connect.
Touch Scan to search for available multi-connect devices, and then select the devices
and follow the prompts to complete the connection.
Settings 134