Samsung SPH-M580ZKASPR - Manual (Page 167)

3B. Web and Data Services 153
Web a
n
d
Dat
a
2. To manually add your new network connection:
Ⅲ Touch Add Wi-Fi network .
Ⅲ Enter the Network SSID. This is the name of your
Wi-Fi network.
Ⅲ Tap the Security field and select a security option.
This must match the current security setting on
your target network.
Ⅲ If secured, you will also need to enter the wireless
password. The
show password option, reveals the
password as you type it instead of showing only
asterisks (****).
Ⅲ Tap Save to store the new information and
connect to the Wi-Fi network.
To manually scan for a Wi-Fi network:
1. Press > > >
Wireless & networks > Wi-Fi settings.
2. Press and tap Scan .
Wi-Fi Status Indicators
The following icons show your Wi-Fi connection status
at a glance:
– Wi-Fi is connected and active.
– Wi-Fi active but there is a communication
issue with the target Wireless Access Point
(WAP).
Using the Wi-Fi Settings Menu
The Wi-Fi settings - Advanced menu allows you to set
up many of your device’s Wi-Fi service, including:
ⅷ Setting your Wi-Fi sleep policy
ⅷ Viewing your device’s MAC Address
ⅷ Configuring use of either a DHCP or Static IP
To access the Wi-Fi Settings menu:
1. Press > > >
Wireless & networks > Wi-Fi settings .
2. Press and tap Advanced .
Note: The next time your device connects to a previously
accessed or secured wireless network, you are not
prompted to enter the wireless password again, unless
you reset your device back to its factory default settings.
SPH-M580.book Page 153 Thursday, January 12, 2012 2:53 PM