Samsung SPH-M580ZKASPR - Manual (Page 69)

2B. Making and Answering Calls 55
Calls
In-Call Options
Once you initiate a call, you
will see six onscreen options.
Tap an option to select it.
ⅷ Show dialpad to use the
onscreen dialpad to enter
additional numbers, for
example, an extension or
access code.
ⅷ Add call touch to initiate a
3-way call (page 140).
ⅷ End call to end the current
call.
ⅷ Mute to mute the microphone during an active call.
Tap again to unmute the microphone.
ⅷ Speaker to route the device’s audio through the
speaker ( On ) or through the earpiece ( Off ).
ᮣ Activate Speaker to route the device’s audio
through the speaker. (You can adjust the speaker
volume using the volume buttons.)
ᮣ Deactivate Speaker to use the device’s earpiece.
ⅷ Bluetooth to route the device’s audio through a
connected Bluetooth headset ( On ) or through the
speaker ( Off ). (See “2J. Bluetooth” on page 124.)
Ⅲ When the call is routed to a Bluetooth headset,
the current call area shows the
Bluetooth call
icon ( ).
● To route the current call back to the device,
tap
Bluetooth to temporarily use the device.
Tap it again to route the call back to the
connected Bluetooth headset.
Ⅲ When Bluetooth or the Bluetooth headset is
turned off, the call is routed through either the
earpiece or speaker and shows (
).
Touch and drag up Dialpad ( ) to use the
onscreen dialpad to enter additional numbers, for
example, an extension or access code.
Note: If Mute is activated, the speaker mode is deactivated.
Note: The Headset button is activated to show the current call
is routed to the connected Bluetooth headset.
WARNING: Because of higher volume levels, do not place
the device near your ear during speakerphone
use.
Dialpad Dialpad
SPH-M580.book Page 55 Thursday, January 12, 2012 2:53 PM