Samsung SPH-A880TSSXAR - Manual (Page 168)

154 Section 2I: Using Your Phone’s Voice Services
Using Call <Name or #>
You can voice dial from your phone with a single
command by saying “Call” followed by a name or
nickname (see documentation for details) and (optionally)
a label stored in your contact list, or “Call” followed by a
valid phone number. You can also say “Call” by itself and
be prompted for the name or number.
Calling Contacts Entries
To place a call using Call <Name or #>:
1. Press and hold .
2. Say “Call” followed by the name and the label for that
number. For example, say “Call John Mobile.” The
phone dials the number stored for the contact “John”
with the label “Mobile.”
If the location recognized for the name does not have a
number stored in contacts, VoiceSignal will play the
message “No number available, John Smith, Mobile,” and
then launch the Contacts application for that name.
If a name has only a single number, or if you know the
name but are not sure which number to call, say “Call”
followed by the name only. For example, say “Call John.” If
the name is recognized and there is only one number for
the name, VoiceSignal immediately places the call. If there
are multiple numbers stored for the contact, the phone
prompts you with “Which Number?” and displays a list of
options. You can select an option by saying it or by using
your keypad.