Samsung SPH-A503ZKASKE - Manual (Page 100)

100
You can switch from Camcorder mode to Camera mode by pressing the key.
Tip: At this point, you can close your device and continue to use the video camera. With Auto Save set to On, the videos
you take with the slide open or closed are automatically saved in the Int Album or Ext Album. (See “Settings” on page
106 for more information.)
3. Using the display as a viewfinder, point the camera lens at your subject.
4. Press the key or the Camera key ( ) when the image that you wish to capture
appears in the display. Recording continues until you press the key or until 15
seconds of video has been recorded, whichever comes first.
The video is automatically saved to memory.
Video Camera Options
The Video Camera Options let you adjust the default video camera settings for the duration
of the current session. You can temporarily adjust video camera settings to suite available
lighting, the subject of the video, or the purpose of the video. To access the Video Camera
Options, do the following:
1. In standby mode, momentarily press the Camera key ( ). The SNAP menu appears
in the display.
2. Use the Up and Down navigation keys to highlight Video Camera, then press the
key. The video camera viewfinder screen appears in the display.
3. Press the key. The following sub-menus appear in the display:
•
View Settings
•
Resolution
•
Frame Rate
•
White Balance
•
Lighting
•
Record Sound
•
Effects
•
Save Location
4. Use the Left and Right navigation keys to highlight the desired option and/or setting,
then press the
key to save the selected setting.
View Settings
View Settings shows the current option settings: video clip Size, Frame Rate, WB (White
Balance), and Record Sound setting.
1. In video camera mode, press the left soft key ( ). The options menu bar appears in
the display with the View Settings pop-up showing.
?@ .