User memory – Samsung SPH-A503ZKASKE User Manual
Page 132
132
3.
Press the Reset (left) soft key (
) to reset the stopwatch count to all zeros.
User Memory
User Memory lets you use your device as one (internal memory only) or two (internal
memory + optional Memory Card) USB flash drives.
Connect Device
To connect your device to a personal computer as a USB flash drive, do the following:
1.
Use the Data Cable supplied with your device to connect it to a personal computer
USB port.
2.
In standby mode, press the MENU (left) soft key (
), then press
(for PLAN)
and
for
User Memory. The following options appear in the display:
•
USB Disk Mode — Lets you load files onto your device.
•
File Manager — Lets you manage loaded files.
•
Memory Info — Lets you review used and available memory. (See “Memory Info” on page
80 for more information.)
3.
Use the Up and Down navigation keys to highlight USB Disk Mode.
4.
Press the
key. You are prompted to enter the device password.
Note: The default password is ‘0000’.
5.
Enter the device password using the keypad keys. “To avoid data loss please eject
device before removing it.” pops-up in the display, followed by the USB Disk Mode
screen.
You can now use the device like a USB flash drive.
Disconnect Device
To disconnect your device from a personal computer, do the following:
1.
On your personal computer, eject (stop) the device-related USB drive.
2.
On your a503 device, in the USB Disk Mode screen, press the Menu (left) soft key
(
). The following options appear in the display:
•
Format Disk
•
Disconnect
3.
Use the Up and Down navigation keys to highlight Disconnect.
4.
Press the
key. “Disconnecting” appears in the display followed by returning to
the User Memory menu.
5.
Disconnect the Data Cable from your device and the personal computer.