Samsung SPH-A503ZKASKE - Manual (Page 25)

Section 2: Understanding Your Device 25
Your Device’s Modes
Vibrate Mode
1. In standby mode, press the MENU (left) soft key ( ), then press (for
CUSTOMIZE), (for Settings), (for Sound), and for Ring Vibration.
The following options appear in the display:
•
Ring Only — An incoming call plays the ringtone selected with the Ring options.
•
Vibrate — An incoming call causes the device to vibrate.
•
Light Only — An incoming call causes a message to appear in the display.
•
Vibrate then Ring — An incoming call causes the device to vibrate then play a ringtone.
•
Ring and Vibrate — An incoming call causes the device to play a ringtone then vibrate.
2. Use the Up and Down navigation keys to highlight Vibration, then press the key.
Note: The Vibrate icon ( ) appears in the display when the device is in Vibration mode.
Adjust the Ringer
1. In standby mode, press the MENU (left) soft key ( ), then press (for
CUSTOMIZE), (for Settings), (for Sound), and for Volume. The
Volume screen appears in the display.
2. Use the Up and Down navigation keys to highlight Ring Volume.
1. Use the Left and Right navigation keys to adjust the Ring Volume to one of its five
settings. The current ringtone sounds at the selected level.
2. When you are satisfied with the setting, press the key. Your device returns to the
Sound menu.
Camera Mode
Camera and Video Camera modes let you activate your device’s camera to take pictures or
videos. In Camera/Video Camera mode, you can also adjust the resolution and appearance
of your pictures/videos.
See “Section 9: SNAP” on page 94 for more information.
•
Entering Camera Mode — In standby mode, press and hold the Camera key ( ) on the
lower right side of your device.
•
Entering Video Camera Mode — In standby mode, press the Camera key on the lower right
side of your device. The SNAP menu appears in the display. Select Video Camera.
•
Exiting Camera Mode — Press the key or the key.
?@ .
?@ . ?@ .
?@ .
?@ .