Samsung SPH-A503ZKASKE - Manual (Page 79)

Section 7: CUSTOMIZE 79
Call Settings
1. In standby mode, press the MENU (left) soft key ( ), then press (for
CUSTOMIZE), (for Settings), (for Call), and for Answer Call On.
The following call answer options appear in the display:
•
Slide Open — Sliding the device open or pressing answers a call.
•
Open + Anykey — Sliding the device open or pressing any key except the key or key
answers a call.
•
Open + Send Key — Sliding the device open or pressing answers a call.
2. Use the navigation keys to highlight an option.
3. Press the key to select the method for answering calls.
Call Forwarding
1. In standby mode, press the MENU (left) soft key ( ), then press (for
CUSTOMIZE), and (for Settings), (for Call), and for Call
Forwarding.The following options appear in the display:
•
Set Number
•
Cancel
2. Use the navigation keys to highlight the method you wish to use for forwarding calls,
then press the
key.
Call Ignore
Call Ignore lets you control which incoming calls, if any, you wish to receive. Using Call
Rejection you can elect to reject calls from specified numbers, to receive calls only from
specified numbers, or to reject all incoming calls.
1. In standby mode, press the MENU (left) soft key ( ), then press (for
CUSTOMIZE), and (for Settings), (for Call), and for Call Ignore.
You’re prompted to enter the password for your device.
Note: The default password is ‘0000’.
The following options appear in the display:
•
Settings — Lets you enable/disable Call Rejection; specify whether to reject calls from Saved
Numbers, Unsaved Numbers, or All Numbers; assign a Sound Effect to call rejections.
•
Ignore List — Lets you review and manage the list of Saved Numbers you selected in the
Call Log (see “Calls Log” on page 30 for more information) or entered directly using Set
Number.
•
Ignore Group — Lets you reject calls from one or more Contact Groups.
Tone Length
Use this menu to set DTMF settings to Short or Long.
?@ .
?@ .
?@ .
?@ .